VIAIR 20014 Dual 380C OBA For up to 40" Tires – 200 PSI / 2.54 CFM – STEALTH BLACK

VIAIR’s Dual 380C Onboard Air System is a pre-packaged compressed air solution that provides two 380C, 100% duty cycle compressors, a 2.5 gallon air tank, an inline pressure regulator, and all necessary components needed to install a working system, useful for multiple pneumatic applications.

Please Note: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8? is 10 ~ 11 ft. lbs. Recommended torque for 1/4? and 3/8? is 12 ~ 15 ft. lbs.

FEATURES
– 2.5 Gallon 200 PSI VIAIR Air Tank
– (2) 380C VIAIR (Stealth Black or Pewter) Compressors
w/Thermal Overload Protectors
– 30ft. Coil Hose with Quick Connects (20013)or
– 30ft. Black Inside Braided Coil Hose (20014)
– Tire Inflation Gun with 200 PSI Gauge
– 0-220 PSI Pressure Regulator
– Sealed Pressure Switch (165 PSI on, 200 PSI off)
– 200 PSI Illuminated Dash Panel Gauge
– (2) 40-amp Relays
– Inline Fuse Holder
– 1/4” Quick Connect Coupler (M)
– 1/4” 250 PSI Safety Valve
– 1/4” Drain Cock
– (2) 1/8” BSP to 1/4” NPT
– (3) 1/4” Compression Fittings
– 5 Pc. 1/4” NPT Plugs Kit
– 6-Port Billet Manifold with Mounting Bracket (1/4”)
– (2) 20ft. 1/4” Air Line Included
– Electrical Connections

SPECIFICATIONS
– 12-Volt
– Permanent Magnetic Motor
– Duty Cycle: 100% @ 100 PSI
– Max. Working Pressure: 200 PSI
– Max. Amp Draw: 44 Amps
– Ingress Protection Rating: IP67

All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.