Additional Images

FABTECH 4-INCH RADIUS ARM SYSTEM W/ FRONT DIRT LOGIC 2.25 RESI SHOCKS & REAR DIRT LOGIC SHOCKS – K2289DL

K2289DL
DESCRIPTION
2017-19 FORD F250/F350 4WD
Fabtech’s Radius Arm system for the Ford Super Duty is built to handle the on and offroad demands of the truck enthusiast. This system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires.

The heart of this quality system is Fabtech’s tubular Radius Arms. The design of these arms comes from Fabtech race components built with a tubular structure reinforced by a dimple die side plate and heavy gusseting for rugged offroad use. They are an outstanding upgrade to the stock stamped arms.

This Radius Arm design has been proven in over 10 years of service in military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. System includes a free 5 year 60,000 mile powertrain warranty.

Included with this system is Dirt Logic 2.25 Stainless Steel reservoir shocks in the front and non reservoir shocks in the rear. These Dirt Logic shocks have been ride tuned to the vehicle with the Fabtech Coil Springs and oversized tires for an excellent ride quality both on and offroad.

Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understanding of each these components, please see below.

FEATURES
Fabtech Replacement Radius Arms
Fabtech Front Coil Springs
Trac Bar Relocation Bracket
Sway Bar Drop Brackets
Pitman Arm
Rear Block & U-bolt Kit

RADIUS ARM
Tubular construction with dimple die side plate for superior strength. Arms are offset for full turning radius with 15.50 wide tires on 5? back space wheels. Radius Arms have 2 degrees of caster built in for the increased ride height. Adjustable alignment cams on the arms allow for an additional 1.5-2 degrees of caster adjustment.

COIL SPRINGS
American made hot wound coils have been designed for a very compliant ride quality both on and offroad. Each coil is preset during the manufacturing process to insure no ride height settling over time. Allows for a 2? increase in wheel travel over stock when used with Fabtech shock absorbers.

TRACK BAR BRACKET
1/4? thick steel bracketry repositions the factory track bar to center the axle under the vehicle with the increased lift height. Super stout box style bracket is designed to eliminate deflection when the track bar moves through its full cycle.

DROPPED PITMAN ARM
Forged steel construction with high strength material that exceeds the factory specifications. Designed specifically for the Ford Super Duty to work in conjunction with the factory drag link and Fabtech’s Track Bar bracket for proper steering functionality.

FRONT BUMP STOP BRACKETS
Heavy duty 1/4? thick steel brackets extend the factory bump stop cushions down to eliminate over cycling of the suspension. The bracket’s semi boxed construction can handle the full impact compression of the massive Super Duty.

SWAY BAR BRACKETS
1/4? thick steel drop brackets re-position the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range.

BRAKE LINE BRACKETS
Re-positions the factory brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact.

STEERING STABILIZER BRACKETS
Retains the stock Ford heavy duty steering stabilizer with a 1/4? thick steel bracket and support brace to help reduce tire shimmy.

REAR ADD-A-LEAF
A single leaf is inserted into the spring pack to provide an additional 1.5? of rear lift with a double pin configuration for strength.

REAR LIFT BLOCKS
Cast iron rear lift blocks with an integrated bump stop replaces the stock blocks for additional lift without changing the ride quality of the factory rear suspension or load carrying capacity.

REAR U-BOLTS
American made U-Bolts designed to attach the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.

DIRT LOGIC 2.25 SHOCKS
Constructed of a stainless steel body with NitroSteel® piston rod for maximum corrosion resistance and durability. Superior ride quality both on and offroad. Excellent damping for offroad use.
Pricing: $3,478.81
Qty:
Free Shipping!

Description

TIRES & WHEELS
Tire Size – 315/70R17 Wheel Size – 17×8 w/ 4 1/2in BS w/minor trimming
Tire Size – 325/65R18 Wheel Size – 18×9.5 w/ 4 3/4in BS w/minor trimming
Tire Size – 35/12.50R20 Wheel Size – 20×9 w/ 5in BS w/minor trimming

INCLUDED SHOCKS

FRONT DIRT LOGIC 2.25 RESI SHOCK
Dirt Logic 2.25’s are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.

2.25" OD Stainless Steel Body
2.0" OD Billet Aluminum Piston
7/8" NitroSteel® BlackPiston Rod
Polyurethane Mounting Ends
2.25" OD Aluminum Reservoir w/-6 Stainless Steel O-ring Hose

REAR DIRT LOGIC 2.25 SHOCK
Dirt Logic 2.25’s are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.

2.25" OD Stainless Steel Body
2.0" OD Billet Aluminum Piston
7/8" NitroSteel® Black Piston Rod
Polyurethane Mounting Ends

REAR DIRT LOGIC 2.25 SHOCK
Dirt Logic 2.25’s are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.

2.25" OD Stainless Steel Body
2.0" OD Billet Aluminum Piston
7/8" NitroSteel® Black Piston Rod
Polyurethane Mounting Ends

FOOTNOTES
3. Non dually models only.
42. Will not fit gas motors.
165. Some 2017 models may require a dual steering stabilizer for oversized tires. Order Dirt Logic – FTS220512, Dirt Logic w/resi – FTS221162, Stealth – FTS8046.

Details

  • K2289DL
  • K2289DL
  • Fabtech
  • New

Categories

Shipping Information

  • Item Requires Shipping
  • 65.0 lbs.
  • W24.0000” x H24.0000” x L12.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.


  • Have a question? Ask the Pros
  • 949-581-5001Mon-Fri: 9:30am-6:30pm
    Sat: 10am-2pm
    Sun: Closed