Additional Images


2007-14 CHEVY 1500 SUV/SUT | GMC 1500 SUV/SUT 4WD

Fabtech has developed this system with our proven one piece high arched lower crossmember design. An integrated differential skid plate adds solid support of the front suspension. Special attention was given to the design of replacement extended length steering knuckles to keep the track width of the vehicle near stock while retaining turning radius for easy maneuverability in tight areas. The rear system features extended length tubular upper and lower link arms with an oversized Trac bar relocation bracket to properly place the axle under the vehicle with zero driveline vibration. Model specific rear coil springs maintain proper ride height. The Basic System also features front strut assembly spacers and rear performance coil springs. This system provides a stock like ride. Installation does not require relocation of the Rack and Pinion or disassembly of the front strut assemblies.

Heavy Duty 1/4" Thick, High Arched Crossmember
Front Differential Skid Plate
Ductile Iron Steering Knuckles
Impact Struts
Track Bar Relocation Bracket
Rear Extended Length Tubular Upper & Lower Link Arms
Rear Coil Springs
Pricing: $3,018.65
Free Shipping!


Tire Size – 35/12.50R17 Wheel Size – 17×8 w/ 5in BS w/minor trimming
Tire Size – 325/65R18 Wheel Size – 18×9 w/ 5in BS w/minor trimming
Tire Size – 35/12.50R20 Wheel Size – 20×9 w/ 5in BS w/minor trimming

8. Will not fit all wheel drive models.
16. Utilizes stock rear shocks.
72. Some models may not be level after install. Order (FTS21064) 1" rear coil spacer.
132. Will not fit 2WD Suburban mode


  • K1019
  • K1019
  • Fabtech
  • New


Shipping Information

  • Item Requires Shipping
  • 65.0 lbs.
  • W24.0000” x H24.0000” x L12.0000”
  • Free Shipping!

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.

  • Have a question? Ask the Pros
  • 949-581-5001Mon-Fri: 9:30am-6:30pm
    Sat: 10am-2pm
    Sun: Closed